19
Maintenance And Service
A
B
DETAIL
A
SCALE
1 : 8
DETAIL
B
SCALE
1 : 1
A
B
C
DETAIL
A
SCALE
1 : 8
DETAIL
B
SCALE
1 : 1
DETAIL
C
SCALE
1 : 3
e
mbeR
L
iGhts
R
emoVaL
:
1. Disconnect electrical power to the unit.
2. Remove front burner (see
m
aIntenance
anD
s
erVIce
- F
ront
B
urner
r
emoVal
).
3. Remove glass media (if installed).
4. Remove media tray by removing the four (4)
T-20 screws (see Figure 24).
5. Lift up light tray to reveal cover plate, remove
the four (4) T-20 screws and feed the wires
out along with the light tray (see Figure 25).
Disconnect the wire connectors to fully remove.
Do not ever remove merettes.
6. Wear cotton gloves when replacing halogen
bulbs. Grab bulb firmly at the base and
pull straight out to remove; replace bulb as
necessary. Grab new bulb by the styrofoam
sleeve - it is vital that your bare fingers to not
contact the bulb (see Figure 26). The oils
from your fingers will greatly reduce the
life-span of the bulb.
7. Reconnect electrical power.
Figure 24. Media Tray Removal
Figure 25. Cover Plate Removal
Figure 26. Halogen Bulb Replacement
