9
Figure 4: Proflame 2 Transmitter LCD Screen.
Figure 5: Integrated Fireplace Controller
Low battery alarm
Key Lock
Room
Temperature
Dimmer ON
Set Point
Temperature/Level/State
Flame ON
Thermostat OFF/
ON/SMART
Comfort fan
Transmission
Split Flow
Aux ON
CPI mode
Operating Instructions
i
nteGRateD
F
iRepLace
c
ontRoLLeR
(iFc):
Reset Button
The IFC is the master controller for your fireplace control system known as Proflame 2. This unit will control all
aspects of the fireplace by receiving commands from the remote transmitter. This controller is powered by 120VAC
but can also run off a (4) AA battery back-up if there is a power outage. Only main burner control can be used while
operating with the battery back up; auxiliary components, such as the convection fan, cannot be used. Use the reset
button (see Figure 5) to synchronize the remote transmitter to the IFC for the first time, or after batteries have been
replaced.
CAUTION: Property Damage Hazard. Excessive heat can cause property damage. The appliance can
stay lit for many hours. Turn off the appliance if it is not going to be attended for any length of time.
Always place the Transmitter where children cannot reach it.
WARNING: Fire Hazard. Can cause severe injury or death. The Transmitter causes ignition of the
appliance. The appliance can turn on suddenly. Keep away from the appliance burner when operating
the remote system.
