18
Orifice
Figure 24: Orifice Location
B
C
E
DETAIL
B
SCALE
1 : 3
DETAIL
C
SCALE
1 : 1.5
DETAIL
E
SCALE
1 : 3
Figure 23: Pilot Orifice
c
onVeRsion
K
it
i
nstaLLation
:
1.
Disconnect the gas supply completely as well as any electrical power source before proceeding.
2. Remove surround panel, door cover, glass door, media tray, and burner (see
m
aIntenance
anD
s
erVIce
section of Owner’s Manual
).
3.
Convert the existing burner orifices with the ones provided in this kit using a 3/8 inch deep socket.
WARNING: BE SURE TO INSTALL THE CORRECT ORIFICE INTO THE CORRECT PORT
F
ueL
c
onVeRsion
:
TO BE INSTALLED BY A QUALIFIED SERVICE AGENCY ONLY
Please read and understand these instructions before installing.
Warning: This conversion kit shall be installed by a qualified service agency in accordance
with the manufacturer’s instructions and all applicable codes and requirements of the
authority having jurisdiction. If the information in these instructions is not followed
exactly, a fire, explosion or production of carbon monoxide may result causing property
damage, personal injury or loss of life. The qualified service agency is responsible for
the proper installation of this kit. The installation is not proper or complete until the
operation of the converted appliance is checked as specified in the manufacturer’s
instructions supplied with the kit.
Kit Parts List for G39GI Model:
1 - Burner Orifice
LP [DMS #52] NG [#36 DMS] as marked
1 - Pilot Orifice (LP)
1 - Stepper Motor w/ Hardware
1 - Installation Instruction Sheet
4 - Conversion Labels
Carefully inspect all parts supplied with this conversion kit. If any parts have been damaged or are
missing, contact your dealer, distributor or courier company to have them replaced before starting this
installation.
Maintenance And Service
Summary of Contents for G39GI
Page 51: ...51 Parts Diagram 1 2 3 4 5 6 12 7 8 11 10 9...
Page 52: ...52 Notes...
