Secondary Installation
R
EMOVING
AND
I
NSTALLING
T
HE
B
RICK
P
ANEL
:
18
Caution:
Use only the type of ember
material supplied with this fireplace.
Due to the irregular size of the ember
material, there may be more than
required. Use of other foreign materials
on the burners may create dangerous
conditions.
If over time, through cleaning and
servicing, these embers require
replacement , contact your nearest
Enviro dealer.
IMPORTANT:
Upon the first light up
after installing logs and embers, watch
for ignition to ALL burner ports. If a long
delay is noted wait for the appliance to
cool down:
•Open the front door of the appliance
•Carefully reposition the embers,
making sure that the burner ports are
not plugged or blocked.
Open the door. Remove the log set. Remove
the burner tray by undoing the hold-down
screws located in the center of the pan burner
and sliding the assembly to the left, then up.
Gently pull right brick side panel inward from
the bottom back. Pull towards the back then
out, freeing it from the front retainer.
Caution Pilot may damage panel. Remove left
side panel in the same fashion.
To install, insert front edge of brick panel
into the retainer and very gently move panel
forward and out until flush against firebox
side.
