Enviro Carbon Pro Series, Owner'S Manual

Page: 13 / 22

Enviro Water Products Pro Series Water Filter and Salt
Free NaturSoft
®
System
© 2014 Enviro Water Solutions LLC
3060 Performance Circle, Suite 2. DeLand, FL 32724
Rev A
Page 1 3
www.envirowaterproducts.com
Sediment Filter Installation
1. Unscrew the cover from the Blue Housing.
2. Attach the Mounting Bracket to the Cover using the supplied Bolt Head Screws and Washers. Make
sure to orientate the INLET and OUTLET correctly to match the flow pattern.
3. Attach the Sediment Filter System to the wall using the supplied Phillips Head Screws.
4. Connect the outgoing water supply from th e NaturSoft ® system to the INLET of the Sediment
Filter.
5. Connect the outgoing water supply to the OUTLET of the Sediment Filter to finish the bypass.
6. Remove the plastic covering from the Sediment Filter.
7. Place the Sediment Filter onto the s tand p ipe in the Blue Housing.
8. Tighten the Blue Housing using the supplied Sediment Filter Wrench (counter clockwise) Do Not
Over Tighten .
Notice:
The
Sediment
Filter Housing comes with a 1
1/2
” threaded female inlet/outlet and will require additional
fittings to adapt to your plumbing.
Sediment Filter Cover
Sediment Filter
O-Ring
Stand Pipe
Sed iment Filter Housing
Top View
Mounting
Bracket
INLET OUTLET
IN
OUT
Sediment Filter
Incoming
Water
Supply
Water Filter
Wall
Wall
Unions
(Recommended)
INLET OUTLET
Salt Free NaturSoft ®
Hose Spigot