MAC 10
®
IQ
Fan Filter Unit
3
Innovators in Clean Air Technology | www.envirco.com | Operation & Maintenance
I n s t a l l a t i o n & S e r v i c e M a n u a l
■
Critical Operation Conditions of the MAC 10 IQ
1.
Touching of the HEPA filter will damage it, voiding the warranty on the filter. The screen is only to protect against an
accidental ‘touch’ of the filter. Never place a hand or tool on the filter. Never lie filter face flat down on a surface always
have filter on its side to protect from damage.
2. Prior to powering the unit, verify voltage on label and that the unit has been wired into the correct voltage. The serial
number label on the top of the Mac 10 IQ unit has the required voltage.
3. To insure you order the proper replacement parts or complete MAC 10 IQ unit, record the part number and serial number.
This information is located on the serial number label, located adjacent to the electrical box. If you can’t locate the Sales
Order Number, please contact ENVIRCO for this information. Once obtained, record the information for reference.
■
Part Numbers Covered by this Manual
MAC 10 IQ Standard
P/N
2x4
11074-XXX
2x3
11084-XXX
2x2
11083-XXX
MAC 10 IQ RSR
P/N
2x4
11089-XXX
2x3
11087-XXX
2x2
11086-XXX
MAC 10 IQ RSRE
P/N
2x4
11089-ZXXX
2x3
11087-XXX
2x2
11083-ZXXX
MAC 10 IQ RX RSR
P/N
2x4
11124-XXX
2x3
TBA
2x2
11127-XXX
MAC 10 IQ RX RSRE
P/N
2x4
11124-ZXXX
2x3
TBA
2x2
11127-ZXXX
Units come set in manual mode from
the factory. Please review installation
requirements and set up with your end user
(See page 8 for complete set up instructions).