
Hospi-Gard
®
IsoClean
®
800 & 400
HEPA Filtration System
3
Innovators in Clean Air Technology
I n s t a l l a t i o n , O p e r a t i o n , & M a i n t e n a n c e M a n u a l
■
Introduction
Description
The Hospi-Gard® IsoClean® is a portable, self-contained high efficiency particulate air (HEPA) filtration system with an
optional ultraviolet lamp that helps to disinfect the filter face. The IsoClean® is designed to easily and economically create
a negative pressure isolation room that will meet OSHA and CDC TB guidelines. The IsoClean® can be used as a positive
pressure clean air recirculating system in clinics, waiting rooms, hospital emergency rooms and other confined areas or as a
partial or complete exhausting system to create a negative pressure isolation room for possible use with patients known or
suspected of having TB, SARS, COVID-19, or other infectious diseases. The IsoClean® is available in two different sizes: the
IsoClean® 400 and the IsoClean® 800. As a recirculating unit, the IsoClean®’s powerful motor/blower can deliver up to 370
CFM (628 m
3
/hr) for the IsoClean® 400 and up to 800 CFM (1360 m
3
/hr) for the IsoClean® 800 to provide a large number
of room air changes per hour to minimize the spread of airborne diseases to patients and health care workers. As a negative
pressure unit, the air passing through the HEPA filter is filtered of 99.99% of particles at 0.3 micron and may be exhausted
directly to the exterior through a window, or through a wall, simply by connecting flexible ducting to the 6 in. (152 mm) collar
located on the top of the IsoClean®.
Features
• Low Cost Isolation Room
The IsoClean® is an easy and economical solution for creating a negative pressure isolation room. Simply roll the
IsoClean® into a standard room, connect flexible ducting to the 6 in. (152 mm) collar on the top of the unit for partial
exhaust or to the optional 8 in. (204 mm) flanged collar for total exhaust, and vent the purified air to the exterior through
a window or wall.
• Flexible Applications
The versatile IsoClean® can be used as a clean air recirculating unit, a negative pressure unit, or as a split system
to create both negative pressure and clean air recirculation by simultaneously exhausting some of the air out while
recirculating the remainder back into the room.
• Small and Portable
The IsoClean® can be rolled from one room to another and easily fits into areas with limited floor space.
• Simple Maintenance
Both HEPA filter and prefilter are easily accessible for replacement by authorized personnel.
•
Adjustable Airflow
The IsoClean® provides effective air filtration for a wide variety of room sizes. The IsoClean® 400 utilizes a solid state
speed control with airflows ranging from 70 to 370 CFM (118 to 628 m
3
/hr). The IsoClean® 800 utilizes a three position
switch with airflows ranging from 560 to 800 CFM (951 to 1360 m3/hr).
• Low-High Clean Air Circulation Pattern
Room air, along with airborne contaminants, is drawn into the intake grill at the bottom while the purified air is discharged
at a high velocity from the exhaust grill located at the top of the IsoClean® to generate a sweeping, low-to-high air
circulation pattern with adequate “reach” to optimize the clean breathing zone for patient and staff.
• Quiet Operation
52 dBA on low, 56 dBA on medium, and 60 dBA on high speed measured 30 in. (762mm) from face of the unit.
Applications
Hospital
• Negative Pressure Rooms
• Emergency Rooms
• Waiting Rooms
• Sputum Induction
• Aerosol Pentamidine Treatment
• Intensive Care Units
•
Bronchoscopy Rooms
• Renal Dialysis Rooms