TPP50 User Manual
USE
1. Simply plug into a standard wall outlet (120v AC 60Hz).
NOTE – Your Therapure
®
50 Mini UV air purifier should NEVER be used
with extension cords.
2. The Therapure
®
50 Mini UV air purifier should immediately illuminate,
and a gentle air flow should be detected.
CLEANING THE COLLECTOR BLADES
There are 2 collection
blades on either side of the
Therapure
®
50 Mini UV air
cleaner, it is recommended
that these are cleaned every
2 weeks. Depending on the
environment more frequent
cleaning might be necessary.
HOW TO CLEAN
1.
Remove the air purifier
from the wall outlet.
2.
Remove the 2 collector
blades from the
bottom of the air
purifier housing.
3.
Wipe the blades clean
using a dry soft cloth
or paper towel.
4.
Install the collection
blades in reverse order.
DO NOT INSTALL WET OR DAMP COLLECTION BLADES. IF THE COLLECTION BLADES ARE WET,
SET ASIDE AND LET THEM DRY FOR 24 HOURS BEFORE INSERTING THEM BACK INTO THE AIR
PURIFIER. MAKE SURE THE UNIT IS UNPLUGGED BEFORE INSTALLING BLADES.
CLEANING EXTERIOR OF AIR PURIFIER
Use a mild detergent and a soft cloth to wipe and clean the exterior of the air cleaner. Do not use
strong solvent like alcohol, benzene, acetone, etc. Do not introduce moisture to the interior of the unit,
make sure it is completely dry before operating the air purifier.
TECHNICAL SPECIFICATIONS
Model
– TPP50
Voltage
– 120 volt 60 Hz
Power Usage
– 8 watts
CARB Certified
– Room Air Cleaner
OPERATING THE TPP50 MINI
TPP50
