background image

7

8

Operation

Set up the Ionic Pro

®

 Compact ionic air purifier as described in “Getting Ready”. Press the 

ON/OFF button to activate your ionic air purifier and get ready to enjoy clean, ionized air 
that cycles through pre-programmed run/rest intervals according to the setting you select. 

The Ionic Pro

®

 Compact ionic air purifier automatically defaults to the HI (high/maximum 

output) setting whenever the unit is turned on.

Press the ON/OFF button one more time to select the LO (low) output setting 
to enjoy intermittent run/rest periods.

Press the ON/OFF button a third time to turn the unit off.

The indicator LEDs light up to indicate your current setting (LO, HI).

Clean Light:
The red CLEAN light will turn on and the unit 
will shut down if cleaning is overdue.

The Ionic Pro

®

 Compact ionic air purifier’s 

collection blades must be cleaned after month of 
use and the internal ionizing wires must be cleaned 
after every two weeks of use (see “CLEANING & 
MAINTENANCE” for full directions). Once the 
collection blades are properly cleaned, thoroughly 
dried and re-inserted into your Ionic Pro

®

 Compact 

ionic air purifier and the internal ionizing wires 
are properly cleaned, normal operations should 
continue. If not, see “DEEP CLEANING” and 
“TROUBLE-SHOOTING.”

CLEANING & MAINTENANCE

UNIT

With very little effort, the Ionic Pro

®

 Compact ionic air purifier delivers cleaner, fresher, 

healthier air to your indoor environments.

Keep your Ionic Pro

®

 Compact ionic air purifier functioning properly by cleaning the 

collection blades after every month of use as recommended. The internal ionizing wires 
are an important part of the Ionic Pro

®

 air purifying system and need to be cleaned after 

every two weeks of use or if your unit starts to make a buzzing noise (see “TO CLEAN 
IONIZING WIRES” and “DEEP CLEANING” sections).

More frequent cleaning is often required if your Ionic Pro

®

 Compact ionic air purifier is 

new or if you place it in a different location. Exposing your Ionic Pro

®

 Compact ionic air 

purifier to candle/oil lamp/fireplace soot and smoke is not recommended and will require the 
collection blades to be cleaned after every exposure (see “IMPORTANT WARNINGS”).

OPERATING THE IONIC PRO® COMPACT IONIC AIR PURIFIER

CLEANING & MAINTENANCE

CA200_ENV_050511.indd   7-8

5/10/11   10:08 AM

Summary of Contents for Ionic Pro Compact CA200











Reviews: