P092D.ABD.CAIRNETGPRS-V2-UserGuide.121018-EN
ENVEA - 111, Bd Robespierre
– CS 80004 – 78304 Poissy Cedex 4 – France
Tel.: +33 (0)1 39 22 38 00
– Fax: +33 (0)1 39 65 38 08
4.2
Technical characteristics of the Cairnet housing
Enclosure and its door are GFK polyester not saturated and
charged with fiberglass. The wathertightness is ensured by
a molded polyurethane seal “in-situ” all around the door.
It is usually installed on supports which consists of stainless
steel tubes, either straight vertical or angled.
The maximum permissible diameter of the mast is 40mm
4.3
Technical characteristics of photovoltaic system
The photovoltaics panels’ kit is fixed on the same supports as Cairnet or other
support. It is adjustable from 0 to 90 ° with regards to the vertical line. The
Azimuth angle is obtained by rotating the entire system on the mast.
The maximum permissible diameter of the mast is 40mm
This system is then easy to connect to the Cairnet box through a plug-in
connectors.
Solar panels are assembled on a mounting system kit which allows to fix it on a
mast (refer to document named ‘’P0116A.ABD.SYS.FIX.PVD06-0053-A.P10-
2220-A’’).
The electrical characteristics of photovoltaic panels are given by the following table:
Table 1: electrical characteristic of photovoltaic panel.
