Aleph2 ET DX4 Manual
50952
www.enttec.com
5
ID:
1552792
Temperature Menu
This menu shows the current fixture temperature in de-
grees Celsius.
LED and CPU operating temperatures can be monitored
from the control panel as well as RDM.
Test Menu
Using this menu you can test every group of LEDS in the
DX4 fixture. The LEDs will turn on at full power, so avoid
looking at the light directly when performing the test.
Firmware Version
Indicates the current firmware version installed in the
fixture. Please check ENTTEC website for latest firmware
version.
Firmware Update
Updating the firmware of the ALEPH2 ET DX4 requires an
ENTTEC USB Pro or a Pro Mk2 usb interface plugged in to
a PC USB port. Connect the USB PRO to the ET through a
standard 5 pin DMX cable.
Please download and install the RDM Controller App
from
www.enttec.com
website, connect the widget to the
unit, power it up and run the application.
To make sure the process has been successful, confirm
the firmware version has changed by looking at the “Soft-
ware Version ID” RDM field or navigate to the Firmware
Version menu using the control panel.
RDM Capabilities
The ALEPH2 ET DX4 supports RDM features and any RDM
Controller can be used to configure it using RDM. The free
“ENTTEC RDM Controller”
App can be downloaded from
ENTTEC website and be used in combination with a DMX
USB PRO or a PRO MK2 widget. The supported RDM pa-
rameters are:
Read only fields
Device Info
Software Version ID
Supported Parameters
Parameters Description
DMX Personality Description
Sensor Value (temperature x 2)
Sensor Definition
Boot Software Version
Manufacturing Label
Device Label
Status Messages
User configurable fields
Identify Device
DMX Start Address
PID_8001: Master faders
DMX Personality
Factory Defaults
Lamp On Mode
Reset Device
Capture Preset
Preset Playback
Please note that DMX Personality, DMX Start Address, Fac-
tory Defaults, Lamp On Mode and Presets fields can also be
configured from the menu interface at the back of the light.
Specifications
Due to continuous improvements and innovations of all
ENTTEC products, specifications and features are subject to
change without notice.
Item
300mm
600mm
Input Voltage
110
–
240V AC
Input Frequency
50/60Hz
Maximum Power Consump-
tion
55 Watts
110 Watts
Light Output (all on)
1460 lm
2920 lm
Minimum turn on
level(DMX=1)
Red:0.1lm
Red:0.2lm
Green:0.9lm Green:1.8lm
Blue:0.36lm
Blue:0.72lm
White:1.7lm
White:3.4lm
CRI
80
CREE XM-L Color Leds Quan-
tity
6
12
Colours
Red, Green, Blue, Neutral
White
Diffuser
Additional diffusers sold sep-
arately
Beam Angle
40°
Control Input
DMX512 & RDM E1.20
Weight (Kg)
3.7
4.9
Weight (Pounds)
8.2
10.8
Cooling Method
Convection
Ambient Temperature
5° to 50° C
Surface Operating
67°C at steady state
Temperature
(full intensity output and
Ta=45°C)
Maximum Surface
70°C
Temperature
Error mode (10% output)ena-
bles if T>70°C recovers after
5°C drop
Ingress Protection Rating
IP20
