OCTO MK2 (71521)
Visit the ENTTEC website for the latest version.
..
USER MANUAL
15
|
ID: 5928937
Document Updated: October 2022
5.
Once EMU finds the OCTO, you will be able to open the device webpage and configure it.
Factory Reset the device using the reset button if the above steps do not resolve the issue.
The OCTO MK2’s factory default resets the OCTO MK2 to static IP address 192.168.0.10 and Netmask
255.255.255.0 with DHCP enabled.
When the OCTO MK2 has DHCP enabled but DHCP server is unavailable (e.g. the device is connected to a
computer without DHCP server), the IP address will fall back to 192.168.0.10 with netmask 255.255.255.0.
What if my LED strip protocol is not in drop down list? How to add new LED strip
protocol to OCTO MK2?
The OCTO MK2 allows the user to choose a pixel output protocol even it is not found in the drop-down list.
Visit the ENTTEC Website to view the ‘OCTO MK2 Custom Protocol Creation Guide’ document for more
information about the key criteria and the step-by-step custom protocol creation guide.
What is the minimum DC voltage for powering the OCTO MK2?
The minimum DC voltage the OCTO MK2 requires to run is 5V.
Servicing, Inspection & Maintenance
The device has no user serviceable parts. If your installation has become damaged, device should be
replaced.
Power down the device and ensure a method is in place to stop the system from becoming energized
during servicing, inspection & maintenance.
Key areas to examine during inspection:
Ensure all connectors are mated securely and show no sign of damage or corrosion.
Ensure all cabling has not obtained physical damage or been crushed.
Check for dust or dirt build up on the device and schedule cleaning if necessary.
Dirt or dust build-up can limit the ability for a device to dissipate heat and can lead to damage.
The replacement device should be installed in accordance with all steps within the installation guide.
To order replacement devices or accessories contact your reseller or message ENTTEC directly.
Cleaning
Dust and dirt build up can limit the ability for the device to dissipate heat resulting in damage. It’s important
that the device is cleaned in a schedule fit for the environment it is installed within to ensure maximum
product longevity.
Cleaning schedules will vary greatly depending on the operating environment. Generally, the more extreme
the environment, the shorter the interval between cleaning.
Before cleaning, power down your system and ensure a method is in place to stop the system from
becoming energized until cleaning is complete.
Do not use abrasive, corrosive, or solvent-based cleaning products on a device.
Do not spray device or accessories. The device is an IP20 product.