background image

Camera Lens
Speaker

-1-

CONTENTS

1. Parts and Functions

Touch Sensitive

Digital Keypad

Nameplate

Call Button

Microphone

Rainy Guard

Side View

90mm

176mm

23mm

Rainy Guard

Side View

Camera Lens

Touch Sensitive

Digital Keypad

Speaker

Nameplate

Call Button

Microphone

119mm

220mm

Screws for panel 

mounting

1.1 Door Station E

1.2 Door Station F

1. Parts and Functions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1
2. Mounting and Setting - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2
     2.1  Door station Mounting - - - - - - - - - - - - - - - - - - - - - - - - 2
3. Terminal Descriptions - - - - - - - - - - - - - - - - - - - - - - - - - - -  5
4. System Wiring and Connections - - - - - - - - - - - - - - - - - - - - 6
     4.1 Basic Connection - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6
     4.2 Electric Lock Connection - - - - - - - - - - - - - - - - - - - - - - - 6
     4.3 Electromagnetic Lock Connection - - - - - - - - - - - - - - - - - 7
     4.4 Multi Door Stations Connection - - - - - - - - - - - - - - - - - - - 9
     4.5 Multi Monitors Connection - - - - - - - - - - - - - - - - - - - - - - 10
5. DIP Switches Setting - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -11
     5.1 DIP Switches Settings of Doorstation - - - - - - - - - - - - - - -11
     5.2 DIP Switches Settings of Monitor - - - - - - - - - - - - - - - - - -11
6. ID Card Registration - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -12
     6.1 Introduction - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 13
     6.2 Add User Cards - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 12
7. Unlock Operations - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 14
     7.1 Unlocking user code - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 14
8. Precaustions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 15
9. Specifications - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 15

Summary of Contents for 13535










Reviews: