B.4. SNMP monitoring agent
If you want to use the
SNMP monitoring agent
to monitor your modules, install the
nShield SNMP component (ncsnmp on Linux).
During the first installation process of the SNMP agent, the agent displays the following
message:
If this is a first time install, the {product_family} SNMP Agent will not run by default.
Please see the manual for further instructions.
See the
User Guide
for your module and operating system for more about how to
activate the SNMP agent after installation.
nShield® Solo and nShield® Solo XC Installation Guide
37 of 49
