Entrust Datacard PB8500, Operator'S Manual

Page: 39 / 70

Operator’s Guide 33
Remake a Job
Use the following procedure to remake passports that were rejected.
1.
In the
Production
window (
Applications
>
Production
) under the
All Jobs
tab, select the job from the list.
2.
Select the
Job Details
tab. The Job Details screen contains a list of all
passports in a selected job.
3.
If any passports have been rejected, click
Remake
in the status bar to
remake those passports.
4.
Click Refresh to update the screen manually.
Pause/Stop/Abort Jobs
When a job is running, perform the following steps on the Production screen to
stop, pause, or cancel the job.
1.
In the Production window ( Applications > Production ), select the
Production tab.
2.
Select one of the following:

Pause
Use Pause to stop the job temporarily. Click Resume to continue.

Stop
Use Stop if you want to restart at a later date. The system finishes any
passports that are already in the track. Click
Start when you want to
finish the job (make sure the correct job is selected).

If the auto-remake function is enabled and an error is encountered,
click
Stop (No Pick) to stop the job and prevent the system from
initiating a remake on the passport that caused the error.

If you select Stop (No Pick) , you can click Remake in the Job Details
tab when you are ready to remake the rejected passports from the
last job.

Abort
Use Abort to cancel the job and clear the passports out of the track. No
remake or error recovery occurs.
You can click and drag using your mouse and use Alt+Click or
Shift+Click
to select multiple passports.