Entrust Datacard PB8500, Operator'S Manual

Page: 11 / 70

Operator’s Guide 5
Specifications and Requirements
System specifications and site requirements are as follows.
Electrical and Environmental Specifications

Electrical, Operating, and Storage
Refer to the PB8500 Passport Issuance System data sheet on the Datacard
website (
www.entrust.com ).

Power Consumption
The power consumption of the system is the sum of the power consumption
of the Controller and all of the modules in the system. To see the maximum
current draw for each module, refer to the PB8500 Passport Issuance
System data sheet on the Datacard website (
www.entrust.com ).

Permissible Current Load
Because the system is modular, it is possible to exceed the permissible load
on the main Controller power cord. If the calculated load on the Controller
power cord or an auxiliary power cord exceeds 12 amps, add more power
inlets and cord(s) to the system.

Electrostatic Discharge Susceptibility
A system can withstand an electrostatic discharge of 15 kV, 330 pF storage,
and 1.5 kW series resistance in tests simulating a human discharge to the
outer surface of the machine. This does not include direct discharge on
printed circuit boards.

Audible Noise
The audible noise level of a system is dependent on the installed modules
and passport personalization data. A system with Controller, Passport Input,
Leafing, Inkjet, Overlay, and Passport Output modules is measured as
follows.
Front Bystander
Position
65.5 dBA to 68.0 dBA
Front Operator
Position
67.5 dBA to 69.5 dBA
Measurements are sound pressure measurements with a handheld
sound meter at the front bystander (1.0 meter from machine, 1.5
meters high) or operator (0.25 meter from machine, 1.5 meters high)
positions per ANSI S12.10-1985, Section 11. All measurements are
averages over 60 seconds (60 L equiv.).