2.2.2
Preparing
a Dismount the original drive system, following components should be retained: door carriers
(1), beam (2), cover set (3), door stops (4), cable holders (5), nuts (11) and screws (12).
Note! If there are not enough nuts (11) and screws (12), use the nuts (35) and the screws (36)
to replace.
Door carrier
1
Beam
2
Cover set
3
Door stop
4
Cable holder
5
Nut: M5
11
Screw: M5x10
12
Nut: M5
35
Screw: ISO 14583 (MRT) M5x10
36
75
Issue 2019-07-13
1018482-EMen-2.0
2 Mechanical installation
