2.3.14
Install the belt lock (option)
a Fix the belt lock (21) to the extension beam (6) with screws (12). Then tighten the screws (12)
with a torque of 10 Nm.
Note! * Cut the extension beam to smaller pieces.
Bi-parting
2/3 of the extension beam for backbone assembly.
1/6 of the extension beam for tension wheel.
1/6 of the extension beam for belt lock.
Left opening
2/3 of the extension beam for backbone assembly.
1/3 of the extension beam for tension wheel and belt lock.
Right opening
2/3 of the extension beam for backbone assembly and belt lock.
1/3 of the extension beam for tension wheel.
Square nut: M6
4
Extension beam
6
Screw: DIN 6921 (M6SF) M6x10 FZB 8.8
12
Belt lock
21
103
Issue 2019-07-13
1018482-EMen-2.0
2 Mechanical installation
