Service
Regular inspections by a trained and qualified person, and the frequency of service occasions, should
at minimum be made according to national regulations or industry standard, in the absence of a
national regulation. This is especially important when the installation concerns a fire-approved door
or a door with an emergency-opening function. To extend the life of your investment and ensure
safe and reliable operation of the door, we recommend a minimum of 2 visits per year or more, de-
pending on usage and operating conditions. Environmental aspects shall also be considered.
Talk to your Entrematic Group representative to learn more about our service offering.
Intended use
The EM PSL150, EM PSL150-T and EM PSL100 are automatic sliding door operators developed to fa-
cilitate entrances to buildings and within buildings through sliding doors.
The door is designed to offer continuous use, a high degree of safety and maximum lifetime. The
system is self-adjusting to the effects caused by normal variations in the weather conditions and to
minor friction changes caused by e.g. dust and dirt.
In emergency situations the doorset is opened and remains open automatically. It may also be
equipped with break-out function, in which case the door leaf is pushed manually open in the escape
direction.
Dual batteries and motors are used in escape routes as indicated in associated certificates. See
"Electrical emergency unit with batteries" on page 17 and "Electrical emergency unit with batteries
and two motors" on page 18. For manual break-out see "Break-out unit PSB" on page 18.
It is to be used indoors where it is suitable for almost all types of external and internal sliding doors.
Ensure that the lock is only activated when there are no persons in the room.
For installation and maintenance see Installation and Service manual 1009203.
Save these instructions for future reference.
Technical specification
Entrematic Group AB
Manufacturer:
Lodjursgatan 10, SE-261 44 Landskrona, Sweden
Address:
Sliding Door Operator EM PSL150, EM PSL150-T and EM PSL100
Type:
100 V AC -10% to 240 V AC +10%, 50/60 Hz, fuse 10 AT
Mains power supply:
Max. 250 W
Power consumption:
IP20
Degree of protection:
Third party approvals from established certification organizations valid
for safety in use, see Declaration of Incorporation.
Approvals:
1009216-EMEI-4.0
Issue 2016-03-14
6
