Safety accessories
Even though the EM PSL150, EM PSL150-T and EM PSL100 are installed to comply with all applicable
safety regulations, it is possible to enhance safety/comfort with the following add-ons (please contact
your local Entrematic Group company for detailed description).
•
Combined motion and presence sensors
•
Separate presence sensors
General accessories
Your EM PSL150, EM PSL150-T and EM PSL100 can be further improved with the following add-ons
(please contact your local Entrematic Group dealer for detailed description).
Cover
Made in clear anodized aluminium as standard. Paint finished in RAL colours or anodizing optional.
Motion sensors
Motion and presence sensors, see separate manuals.
Operation mode selectors
Electrical locks
There are 4 different types of locks to the operator. Locked with power (LDP), fail safe, locked without
power (LD) , fail secure or bistable lock (LDB) and espagnolette lock (LDE).
Note! The espagnolette lock is at the moment not allowed to mount in escape routs.
Manual Opening Lock device, MOLD
For manual unlocking of the electrical lock (LD), locked without power (fail safe).
Micro switch kit
For indication of door and lock position.
Locked door indicator
For indication of locked lock and closed door for connection to alarm system. Old version of LDI.
Electrical emergency unit with batteries
Used if a door is required to be opened or closed by means of a rechargeable battery unit and remain
in this position in the event of power failure. Authorities can demand that the emergency units are
monitored on a regular time basis. Half an hour before this time has elapsed the following opening
impulse generates an emergency opening test. If there is no opening impulse within the next half
hour, the operator control unit generates the opening impulse itself.
If the battery opens the door within the limited time the test is successful and the door resumes the
function set by the operation mode selector.
Note! The test is never performed in operation mode selector setting OPEN. In setting OFF it can be
selected. The test is always performed after a RESET and after changing operation mode selection,
from a position where a test is not done to a position where the test is a demand.
17
Issue 2016-03-14
1009216-EMEI-4.0
