6
IP1938EN - 2017-12-07
5. Commands
5.1 Switching on and off
5.2 Key combinations
The procedure to switch on the display is as follows:
-
press the ENTER key
-
start of display functioning check
-
visualization of first level menu
The procedure to switch off the display is as follows:
-
press the ESC key and keep it pressed
The simultaneous pressing of the keys and ENTER performs an opening command.
+
=
The simultaneous pressing of the keys and ENTER performs a closing command.
+
=
The simultaneous pressing of the keys and performs a POWER RESET command.
(Interruption of the power supply and restart of the automation).
+
=
i
i
NOTE: the pressure on the keys can be quick (less than 2 s) or prolonged (longer than 2 s). Unless specified otherwise,
quick pressure is intended.
To confirm the setting of a parameter, prolonged pressure is necessary.
NOTE: the display switches off automatically after 60 s of inactivity.
Summary of Contents for Ditec MD1
Page 2: ...2 IP1938EN 2017 12 07 ...
Page 31: ...31 IP1938EN 2017 12 07 ...