3.2.6
Fix the tension wheel assembly
a Fix the nuts (11) to the tension wheel assembly (15) with screws (12), but do not tighten the
screws (12).
Lift the tension wheel assembly (15) to the beam (2), do not tighten the screws (12) fully, so it
shall be able to slide along the beam (2).
b The position of the tension wheel assembly (15) should be as close as possible to the drive unit,
but make sure that the tension wheel assembly (15) will not interfere with the door carrier
when the door is fully opened.
2
11
12
15
M5x20 (2x)
Beam
2
Nut: M5
11
Screw: M5x10
12
Tension wheel assembly
15
95
Issue 2019-12-24
1019202-DIen-2.0
3 Mechanical installation
