17
IP2288EN
EN
Additional configurable pa-
rameters available with
AT → AA enabled.
*
*
Firmware update
*
*
*
*
Setting of memory opening
via remote control
Setting of radio coded
messages
Maximum number of
remote controls that can
be stored in the integrated
memory
Menu navigation via remote
control keypad
Selection of function CH1 of
the stored remote control
Selection of function CH2 of
the stored remote control
Selection of function CH3 of
the stored remote control
Selection of function CH4 of
the stored remote control
Deletion of a remote control
Total memory
deletion
Control panel firmware
version
Configuration storage
Configuration loading
Password setting
Password insertion
Deletion of user settings
Loading of last configura-
tion set
Alarm counter
Alarm log
Special functions
Alarm reset
Motor current visu-
alisation
Visualisation of maximum
and minimum tempera-
tures recorded
Limit switch test. Visual-
ises FA/FC only (N.O. / NO
if they are not configured)
Total number of
operations
Partial number of
operations
Power supply hours
Power supply hours
via battery
Maintenance alarm
setting
Visualisation of mainte-
nance alarm mode
Reset of partial operations
counter
Power supply via solar
panels
Energy saving
Signal for batteries
almost flat
Voltage threshold for indi-
cating when the batteries
are almost flat
Battery mode
Selection of opening
limit switch mode
Selection of closure
limit switch mode
Selection of device con-
nected to terminals 1-6
Selection of device con-
nected to terminals 1-8
Configuration of input 1-9
Selection of device con-
nected to terminals 1-6
and 1-8
Switch-on time for
independently commanded
courtesy light
Fixed partial opening
Display mode
Partial opening com-
mand of terminal 1-20
Courtesy light switch-on
time
Duration of disengagement
after edge intervention
Duration of disengagement
on stop during opening
Duration of disengagement
on stop during closure
Selection of type of
obstacle
Stroke estimate correction
NIO intervention tempera-
ture and automatic ramps
Selection of operating
mode for device connected
to terminals 1-6
Visualisation of internal
panel temperature
Automatic ramp adjust-
ment
High temperature protec-
tion enable
Setting pre-flashing time
on opening
Adjustment of approach
speed during closure
Renew automatic closing
time after safety device
release
Learning speed setting
Cy
cl
e c
ounter
s
Ener
gy management
Adv
anc
ed par
ameter
s
