Service and Installation Manual
8
MAINTENANCE
This cooler can be cleaned using warm water and a mild detergent. Rinse with clean water to finish off.
Never use detergents that contain chlorine.
The lid may be cleaned in the same way as the cooler.
If a condenser and associated fan are fitted at the back bottom of the cooler, they can gather dust and dirt. If
cleaning is necessary, they should be vacuumed with a soft brush.
Please note that the parts behind the protective grille can be hot and rotating.
TROUBLE SHOOTING
If you are having problems with your cooler, please check the following point before calling service
personnel:
—Is the cooler connected to the power supply?
—Is the socket switch on?
—Is the fuse in the switch cabinet intact?
—Has the earth leak circuit breaker (if there is one) cut out?
—Has there been power cut?
If the cooler is in a place that is very hot or with bad ventilation, make sure to provide adequate ventilation. If
the condenser mentioned in Section Maintenance is not clean, make sure to vacuum it.
If the above points have been checked and the cooler is still not working, please call service personnel.
Inform them the nature of the problem, the type of cooler, serial number and item number (provided on the
nameplate at the back of the cabinet).
Do not open the cabinet, as every opening hastens the thawing point. As s rule, the goods will not suffer
damage at the first 12 hours. If more time passes, the goods must be moved to another cooler.
DISPOSAL
When a worn-out cooler is to be disposed off, this must be done in a correct manner, with respect to the
environment. Please be aware of the rules covering the disposal of such terms; there may be special
requirements or conditions to be observed.
Information about disposal may be obtained from:
—your supplier;
—the relevant authorities (the Local Authority, environmental agencies, etc.).
SPECIAL POINTS TO NOTE
The information contained in these instruction for use, was correct at the term of printing. On
account of our constant produce development, however, we reserve the right to make changes in
the cooler described here. Naturally, we will attempt to keep instructions for use up to date.
If you are in doubt as to the correct use of the cooler, please contact your supplier, who will be able
to advise you.
The producer is not responsible for accident or problems, occurred as a result of wrong connection
of the cooler.
