10
ENTR® Dead Bolt User Manual
• Turning the ENTR® lock
ON
or
OFF.
2.3.1 Switching the ENTR® ON
Before turning ENTR®
ON
,
verify that the
door is shut.
•
Move the switch to the
ON
position.
Make sure that the knob is in the zero
position (see illustration).
• Function and numeric buttons will all
blink once.
• Hazard beep sound will be emitted and
error indication will blink once.
• ENTR® is now in operating
mode.
Note
:
• After turning ENTR®
ON
, avoid touching
the front panel until beep sound ends.
• After turning ENTR®
ON
, the door will be
shut but not locked.
2.3 ON/OFF Switch
2.3.2 Switching the ENTR® OFF
•
Move the switch to
OFF
position.
2.3.3 Low battery indication
Battery red signal rapidly blinking and 2 long beeps will be sounded during every
lock/unlock action, indicating that the battery is low and needs to be charged.
OFF
ON
•
Zero position
