background image

ELECTRIC POWER SUPPLY 
 

Use the product only with the supplied AC adapter. Connect them to the mains as described in 
the installation instructions and on the identification sticker (mains voltage, current, frequency) 
on the device's power supply.  
Using a power source other than that recommended for this product may cause the product to 
overheat or deform, resulting in electric shock or fire. 
 

ACCESSIBILITY AND ELECTRICAL OVERLOAD 
 

To disconnect the device in the event of a problem, make sure that the outlet to which the 
power cord is connected is easily accessible and as close as possible to the device.  
Do not overload wall outlets and extension cords as this might increase the risk of fire or electric 
shock. 
 

DAMAGES REQUIRING REPAIR 

 
Unplug this product and contact your service provider if you experience any of the following: 

 

if the power supply or plug is damaged; 

 

if any of the supplied cables are damaged or broken; 

 

if liquid has been spilled into the unit or if the unit has been exposed to rain or water; 

 

if the device does not work properly or there are significant differences in performance; 

 

if the device has been dropped or damaged in any way; 

 

if you notice signs of overheating; 

 
 

 

Kamai certifies that this product meets the essential requirements and requirements set 
out in Directive 2014/53 / EU. 
This mark certifies the safety of the equipment for the safety and health of users, the 
electromagnetic compatibility of the equipment, the proper use of the radio frequency 
spectrum and the reduction of the environmental impact of the product. 

The frequency bands and maximum transmission power used by the product are as follows: 
 

 

2400 - 2483.5 MHz: 100 mW 

 

5150 - 5350 MHz: 200 mW 

 

5470

5725 MHz: 1 W 

 
 

This symbol indicates that your old electronic equipment should be collected separately and not can be 

disposed of with household waste. To this end, the European Union has set up a 
special collection and recycling system for which producers are responsible. 
 

• Local collection points are available

 

• A free return system is available at distribution points to purchase equivalent

 

equipment. 

• Follow sorting rules for packaging waste to facilitate recycling.

 

Summary of Contents for Kamai 510b







Reviews: