Janus HD - User’s Guide
16
CONNECTING THE TV USING HDMI
1. Acquire the required cable. Component cable comes packaged with the Janus.
2. Connect the HDMI cable to the Janus. (HDMI does not require separate audio cable connection.)
3. Connect the opposite end of the video and audio cables to the matching input in the TV.
4. Plug in your TV and turn on the power using your TV remote control. Use your TV remote control to
select the respective video input that has connected to the Janus. Consult your TV owner’s manual for
instructions as required.
5. Plug in your Janus and turn on the power.
6. You should now see the output from the Janus on your TV screen.
Figure 4-5 Connecting TV using HDMI
NOTE
:
When the HDMI connection cannot be verified by your TV, disconnect the HDMI cable and then
connect it again, or turn off the TV and then turn it on again.
Analog DVI is not supported. If your TV supports digital DVI but not HDMI, you can use an HDMI to DVI
convector cable or adaptor to connect the Janus HDMI to the TV DVI. In this case, you need to connect
the audio cable separately.
Be sure to use an HDMI cable with the HDMI logo.
If your TV does not support multi-channel audio, the Janus will output PCM audio only.
Please refer to the section 8 - User Menu or the usage instruction provided by your service operator to
set the Component and HDMI output resolution.