Copyright
2007 Entone, Inc. All rights reserved
20
Chapter
6
6.1 Powering-Up Amulet
Follow these steps to power up the Amulet:
1. Follow your TV/Network service provider’s instruction to connect the Amulet to your network modem or
network access unit using the Ethernet cable comes packaged with the Amulet.
Figure 6-1 Connecting Amulet
2. Plug the socket end of the AC/DC adapter into the wall socket and the DC jack into the power
connector on the Amulet.
3. The Amulet front panel power indicator will illuminate in orange color.
4. Within 10 seconds the Amulet front panel will display “BOOT” and then “WELCOME”.
Figure 6-2 Amulet Starting
5. Within 60 seconds splash screen will appear on the TV.
