FUNCTIONS
• Date and time set -
In standby mode, press the Menu button
(3) twice until the heading “setup” has been highlighted. From
here scroll down the list using the up button (2) and down
button (4) until you highlight the heading “Date input”. Confirm
your selection using the OK button (10). From here, use the
up button (2) and down button (4) to set the date/time and
confirm using the OK button (10).
Note: in order to correctly record the date and time of any potential
accident, please set the correct date and time before using this in car
dash camera.
Before recording, ensure that you insert a Micro SD/TF card into
the provided slot (1). This in car dash camera will support cards for
up to 32GB.
• Automatic recording -
To automatically start recording
video, power the unit on by pressing the power button (7) for
3 seconds. This is indicated by the red flashing circle located
at the top middle of the screen. The blue record indicator light
(14) will start flashing. To stop recording, simply press the OK
button again (10).
• Manual recording -
To manual record video, power the unit
on by pressing the power button (7) for 3 seconds. Press the
OK button (10) once. Recording has started. This is indicated
by the red flashing circle located at the top middle of the
screen. The blue record indicator light (14) will start flashing.
To stop recording, simply press the OK button again (10).
• Photo -
In standby mode, quick press the mode button (9)
until the upper right of the screen displays the letter “A”. To
take a picture, press the OK button (10).
• Audio -
In standby mode, quick press the mode button (9)
until the upper right of the screen displays a microphone
symbol . To begin recording audio, press the OK button
(10).
• Playback -
In standby mode, quick press the mode button (9)
until the upper right of the screen displays a play symbol .
05
