INSTALLATION INSTRUCTIONS
1.
Power off the In car dash camera.
2.
Insert the Micro SD/TF card (not supplied) into the card slot.
Note: Please use a high speed Micro SD/ TF card (more than
class 6), the capacity should be more than 2GB. The In
car dash camera can support a Micro SD/ TF card with up
to 32GB of storage.
3. Fasten the in car dash camera to the inner car window using
the car mount accessory supplied.
4. Insert the car charger into the car cigarette lighter.
5. Connect the car charger into the USB interface of the in car
dash camera.
6. Adjust the lens and keep the view parallel with the ground.
7. Power on the In car dash camera via the power button and
check to see if the in car dash camera is installed correctly.
Note: When in car dash camera is installed in the correct way, the
power indicator light (red) will be turned on.
BUTTON FUNCTION
• Power Button -
Long press for approximately 1-3 seconds to
turn on/off the device.
• Up/Down Button -
Select options in both menus and
playback mode.
• Menu Button -
In Video/Photo/Audio mode or Playback
mode, quick press the menu button to enter into menu.
• Lock Button -
Lock the current recording, protecting against
the accidental deletion of data.
• Mode Button -
In standby mode, quick press the mode button
to switch between different modes (Video / Photo / Audio/
Playback).
• OK button
- When in the menu, use the OK button to
confirm. When in Video/Photo/Audio mode press the OK
button to capture/record.
• Menu -
In standby mode, press the menu button, enter into
main menu setting and press the Up/Down button. Choose
the options which you need and press the OK button to
confirm. When settings are adjusted to preference, press the
Menu button to exit.
04
