Enthermics EC1540 Owner'S Manual Download

Page: 31 / 44

AINTENANCE

Blanket Warmer

▪

Operator’s Manual

▪

MN-39929

▪

Rev 2

▪

8/20

How to Clean the Warmer

Before you begin

Monthly cleaning

procedure

To clean the warmer monthly, do the following.

Step

Action

Make sure

that the warmer is disconnected from electric power and cool.

Wipe

the outside of the warmer with a stainless steel cleaner.

Vacuum

lint from fan openings, fan sail switch, and vent openings (if

applicable).

Clean

the interior of the warmer with a damp cloth.

Dry

the interior and exterior of the warmer with a clean, lint-free cloth.

Leave

the door open until the interior of the warmer completely dries.

Clean

each side of the window pane with glass cleaner or distilled vinegar.

Continued on next page

WARNING:

Electric shock hazard.

Disconnect the warmer from electric power before cleaning.

CAUTION:

Burn hazard.

Allow the warmer to cool before cleaning.

NOTICE

Do not use:

▪

abrasive cleaning compounds.

▪

chloride based cleaners.

▪

commercial or household cleaners containing ammonia.

▪

cleaners containing quaternary salts.

Summary of Contents for EC1540













































Search results

Summary of Contents for EC1540

Reviews:

Related manuals for EC1540

Brands by name

Popular brands

Enthermics EC1540, Owner'S Manual

Search results

Summary of Contents for EC1540

Reviews:

Related manuals for EC1540

Brands by name

Popular brands