Enthermics EC1540, Owner'S Manual

Page: 23 / 44

O
PERATION
Blanket Warmer
▪
Operator’s Manual
▪
MN-39929
▪
Rev 2
▪
8/20
23
How to Operate the Blanket Warmer
Before you begin The warmer must be connected to electric power and turned on.
Procedure To operate the warmer, do the following.
Step Action
1. Set the temperature using the arrow buttons .
2. Open the door and load the dry, cotton blankets into the warmer.
Close the door.
During the warming
process
3. Press and hold the timer button and the up arrow at the same
time.
The actual temperature will display for five seconds. Then, the set-point
temperature will display.
4. Rotate the blankets daily from the bottom to the top of the load to ensure
equal heating and to prevent discoloration.
Result The blankets are now warming.
WARNING: Personal injury hazard.
Do not operate the warmer in the presence of a flammable
anesthetic mixture with air, oxygen, or nitrous oxide; in
oxygen-enriched environments; or in any other potentially
explosive environment.
WARNING:
Personal injury hazard.
Make sure the blanket support assembly and shelves are
installed to prevent the blankets from being scorched or
discolored.
NOTICE
Do not overload the cavity.
Allow 1” (25mm) between the blankets and the interior walls.

NOTE:
The temperature set-point range is 98°F – 180°F
(37°C – 82°C).
NOTICE
Do not warm items containing plastic, rubber, metal
snaps, studs, hooks, etc.