38
Operating Hours Settings
The device can count the time when a selected parameter exceeds or falls below an adjusted limit
value. This feature is explained in this section.
Parameter is selected under Hour Counter menu. If you select VLN for example, display changes as
following.
1. Press SET button while HOUR COUN PARA is displayed.
2. Select the parameter with UP/DOWN buttons.
3. Press the SET button.
Afterwards, the limit value is selected. W hen the parameter exceeds this limit value, hour counter will
start.
1. Press SET button while HOUR COUN LEVL is displayed.
2. Enter a limit value by using UP/DOWN buttons. You can select different digits with SET or BACK
buttons.
3. Exit from the menu when selection is complete.
4. When exiting from the menu with the BACK button, don
’
t forget to save the changes.
