SETTING HIGH/LOW SETPOINT VALUE FOR FREQUENCY
SET
SET
SET
SET
SET
SET
SET
ESC
SET
Press SET button for 3 secs.
Find SP menu by
scrolling UP/DOWN
buttons.
Press SET button.(SP
Hi is displayed)
Press SET button.(
Frq Hi is
displayed)
Press SET button
Enter 1st digit value
by scrolling
UP/DOWN buttons
(If
you set 1st digit value
incorrect, you can set again
by pressing ESC button.)
Press SET button
Enter 2nd digit value by scrolling
UP/DOWN buttons
(If you set 2nd digit
value incorrect, you can set again by pressing
ESC button.)
Enter
decimal digit value by
scrolling UP/DOWN buttons
(If you
set decimal digit value incorrect, you can
set again by pressing ESC button.)
Press SET button after you enter the value
Press ESC button one by one until SAU SEt yES is
displayed
Press SET button while SAU SEt yES is displayed.
Press SET button
Find SP FrEq menu by
scrolling UP/DOWN buttons.
Find
Frq Hi/Frq Lo menu by
scrolling UP/DOWN buttons.
SETTING HYSTERESIS VALUE FOR FREQUENCY
SET
SET
SET
SET
SET
SET
SET
ESC
SET
Press SET button for 3 secs.
Find SP menu by scrolling UP/DOWN buttons.
Press SET button.(SP Hi is
displayed)
Press SET button.(
Frq
Hi is displayed)
Press SET button
Enter 1st digit value by scrolling
UP/DOWN buttons
(If you set 1st digit
value incorrect, you can set again by
pressing ESC button.)
Press SET button
Enter 2nd digit value by scrolling UP/DOWN buttons
(If you set 2nd digit value incorrect, you can set again
by pressing ESC button.)
Enter
decimal digit value by scrolling UP/DOWN buttons
(If you set decimal digit value incorrect, you can set again by pressing
ESC button.)
Press SET button after you enter the value
Press ESC button one by one until SAU SEt yES is
displayed
Press SET button while SAU SEt yES is displayed.
Press SET button
Find SP FrEq menu by
scrolling UP/DOWN
buttons.
Find
Frq Hys menu by scrolling
UP/DOWN buttons.
VOLTAGE MONITORING
EVM-05C
5
SP Frq Menu (Setpoints For Frequency)
Frq Hi Menu (High Setpoints For Frequency)
Frq Lo Menu (Low Setpoints For Frequency)
Frq Hys Menu (Hysteresis For Frequency)
Frq Ond Menu (Delay-On Time For Frequency)
Frq Ofd Menu (Delay-OFF Time For Frequency)
The required frequency value for releasing the output relay
for both high frequency warning and low frequency warning
after the output relay is activated. If the high frequency
value falls or low frequency increases as a hysteresis, the
relay releases at the end of the adjusted delay time(Frq
Ofd)
The hysteresis value can be adjusted 0...20 Hz
The frequency of the system is measured from L-1
If the frequency of system is under the high set value (Frq
Hi),output 1 relay is not activated,output 1 LED is on and Hi
LEDs are off.
If the frequency of the system exceeds the high set value, Hi
LED relating to frequency blinks,output 1 relay activates at the
end of adjusted time(Frq Ond),output 1 LED turns off and Hi
LEDs turn on continously.
If the frequency of system are under the high set value (Frq
Hi) as a hysteresis (Frq Hys), output 1 relay releases at the
end of the adjusted time (Frq Ofd), output1 LED turns on and
Hi LEDs turn off.
If the frequency of the system is over the low set value (Frq
Lo),output 2 relay is not activated,output 2 LED is on and Low
LED related to frequency is off.
If the frequency of system is under the low set value, Low LED
blinks,output 2 relay is activated at the end of adjusted time(Frq
Ond),output 2 LED turns off and Low LEDs turn on continously.
If the frequency of the system is over the low set value (Frq
Lo) as a hysteresis (Frq Hys), output 2 relay releases at the
end of the adjusted time (Frq Ofd), output 2 LED is on and Low
lights are out.
The max. frequency value of system that is requested for
L-1 phase
The frequency value can be adjusted 40...70 Hz
If the value is set to zero (0), the high frequency warning is
cancelled.
The min. frequency value of system that is requested for
L-1 phase
The frequency value can be adjusted 40...70 Hz
If the value is set to zero (0), the low frequency warning is
cancelled.
The delay time for activating the output relay for high
frequency and low frequency warning. The value can
be adjusted between 000,0 and 999,9 in terms of seconds.
The delay time for releasing the output relay for high
frequency and low frequency warning.The value can be
adjusted between 000,0 and 999,9 in terms of seconds.
kV
Hz
V
L-L
V
L-N
SET
ESC
L1
L2
L3
kV
kV
OUTPUT 1
OUTPUT 2
VOLTAGE
MONITORING
True RMS
EVM-05C
H
H
H
L
L
L
H
L
kV
Hz
V
L-L
V
L-N
SET
ESC
L1
L2
L3
kV
kV
OUTPUT 1
OUTPUT 2
VOLTAGE
MONITORING
True RMS
EVM-05C
H
H
H
L
L
L
H
L
kV
Hz
V
L-L
V
L-N
SET
ESC
L1
L2
L3
kV
kV
OUTPUT 1
OUTPUT 2
VOLTAGE
MONITORING
True RMS
EVM-05C
H
H
H
L
L
L
H
L
L1
SET
ESC
L2
L3
kV
kV
kV
Hz
OUTPUT 1
OUTPUT 2
V
L-L
V
L-N
H
L
H
L
H
L
H
L
VOLTAGE
MONITORING
EVM-05C
True RMS
L1
SET
ESC
L2
L3
kV
kV
kV
Hz
OUTPUT 1
OUTPUT 2
V
L-L
V
L-N
H
L
H
L
H
L
H
L
VOLTAGE
MONITORING
EVM-05C
True RMS
L1
SET
ESC
L2
L3
kV
kV
kV
Hz
OUTPUT 1
OUTPUT 2
V
L-L
V
L-N
H
L
H
L
H
L
H
L
VOLTAGE
MONITORING
EVM-05C
True RMS