ISSUES RESOLVED IN E9.1.7.0
10/02/03 P/N: 9038090-53
Subject to Change Without Notice
Page: 21
of 31
F0615-J
Protocol Independent Multicast (PIM-SM)
I.D.
When running PIM in an equal cost multi-path environment, if a multicast traffic link goes down and
comes back up, the client may receive duplicate packets.
F4436
If a user comments the
pim global start
command out of the configuration, the router will write a
Layer-3 drop flow when it receives a new multicast stream. The status of the stream does not
change when the command is commented back into the configuration.
F4440
An X-Pedition running PIM-SM will not allow the re-routing of multicast traffic out of the Q-trunk port
on which it was received. Furthermore, the router may assign a multicast stream to an incorrect
replication index
F4500
F4523
F4676
If PIM-SM is enabled on an interface associated with a VLAN whose ID is greater than 2,047, the
router may drop packets.
F4518
F4463
If a multicast server sends traffic across a Q-trunk to a PIM-SM-enabled router during a reboot, the
client may not receive the packets after the router finishes booting.
F4601
F4439
Remote Authentication Dial-In Service (RADIUS)
I.D.
An issue was found and corrected that involves users who authenticate through an X-Pedition to a
RADIUS server. Contact Enterasys Networks Global Technical Assistance Center for additional
information.
F3720
Remote Monitor (RMON)
I.D.
Packet and byte counts for RMON2 tables are inaccurate.
F4031
Changing the RMON configuration from
rmon set lite| standard| professional default-tables yes
to
rmon set lite| standard| professional default-tables no
while RMON is enabled may cause the
router to core.
F4331
When a user executes the help (
?
) option for the
rmon show packet-capture captured-packets
command, a description is not available for the
control-index
option.
F4386
Secure Shell (SSH)
I.D.
The SSH client leaks 136 bytes of memory for each outbound SSH client session established to a
remote SSH server. To reclaim this memory, users must reboot the X-Pedition.
F3432
Continuous attempts (in quick succession) to connect to another device via SSH may cause the
router to stop responding.
F4234
Simple Network Management Protocol (SNMP)
I.D.
The read-only community string may discover a read-write community string when querying
particular MIBs.
F3396
The
snmp set mib
command lists MIBs that users may not enable or disable.
F4141
When querying a ctCDP MIB on a VLAN whose ID is greater than 512, the X-Pedition may core.
F4303
The X-Pedition implements the
any
option of the
snmp set group
command only partially.
F4382
SmartTRUNK
I.D.
The
smarttrunk show distribution
command may display statistics for a blocked STP-enabled
SmartTRUNK.
F4186
Using the
vlan multi-add
command to add a non-existing SmartTRUNK port to a multi-VLAN group
will cause the router to core.
F4508
