Enterasys Vertical Horizon VH-8G, User Manual, Page: 38 / 48

24 Technical Specifications VH-8G
•
The power cord set must have a minimum current capacity of 10A
and a nominal voltage rating of 125 or 250 VAC, as required by each
country’s power system.
•
The appliance coupler must meet the mechanical configuration of an
EN 60 320/IEC 320 Standard Sheet C13 connector for mating with
appliance inlet on the hub.
Country-Specific Requirements
Table A-2 lists the power cord set requirements by country and identifies
the accredited agency within that country.
Table A-2. Power Cord Set Requirements by Country
Country Accredited Agency See Notes *
Australia EANSW 1
Austria OVE 1
Belgium CEBC 1
Canada CSA 2
Denmark DEMKO 1
Finland FIMKO 1
France UTE 1
Germany VDE 1
Italy IMQ 1
Japan JIS 3
Netherlands KEMA 1
Norway NEMKO 1
Sweden SEMKO 1
Switzerland SEV 1
United Kingdom BSI 1
United States UL 2
* The note column includes a number. Associate this
number with the corresponding notes listed after the table
to obtain specific power standards and requirements.
VH-8g.book Page 24 Friday, November 17, 2000 5:29 PM