42
VH-2402-L3 Management Guide
9033691-01
Name for the 802.1Q VLAN you want to edit and press
enter
.
To delete an entire VLAN, toggle the
Action:<Add/Modify>
field to
Delete
, enter either the
VID or the VLAN Name in the appropriate field and
press
Enter.
Highlight Apply and press
Enter.
The
selected VLAN will be deleted. To enter the change
into Non-volatile RAM, select
Save Changes
from the
Main Menu.
802.1Q VLANs are edited by specifying which ports will be
Egress Members, Forbidden non-members or non-members.
The ports are further set to be either a Tagged or an
Untagged port.
To edit the 802.1Q VLAN membership of a port
:
Highlight the first field of
Membership (E/F/-): [ ][ ][
]. Each
port’s 802.1Q VLAN membership can be set individually by
highlighting the port’s entry using the arrow keys, and then
toggling between E, F, or – using the space bar.
To edit a port’s Tagged or Untagged status:
Highlight the first field of
Tagging (U/T):[ ][ ][ ]
field. Each
port’s state can be set by highlighting the port’s entry using
the arrow keys and then toggling between
U
or
T
using the
space bar.
If the port is attached to a device that is not IEEE 802.1Q
VLAN compliant (VLAN-tag unaware), then the port should
be set to U – Untagged.
If the port is attached to a device that is IEEE 802.1Q VLAN
compliant, (VLAN-tag aware), then the port should be set to
T – Tagged.
To configure a port’s 802.1Q VLAN settings:
Highlight the
Configure Port#[ ]
field and enter the port
number of the port you want to configure. Use the arrow