Removing a Power Supply
Enterasys S-Series Stand Alone (SSA) Hardware Installation Guide 2-15
Removing a Power Supply
To
remove
a
power
supply
from
the
SSA:
1.
Put
on
the
antistatic
wrist
strap
and
attach
it
to
the
ground
receptacle
on
the
front
of
the
SSA
before
handling
a
power
supply.
Refer
to
the
instructions
in
the
anti
‐
static
wrist
strap
package.
See
for
the
location
of
the
ground
receptacle.
2.
Unplug
the
associated
power
cord
from
the
AC
outlet.
3.
Remove
the
zip
tie,
if
present,
that
secures
the
associated
power
cord
to
the
SSA.
4.
Unplug
the
associated
power
cord
from
the
AC
inlet.
5.
Unscrew
the
captive
screws
to
release
the
power
supply
from
the
SSA.
6.
Remove
the
power
supply
by
grasping
the
handle
and
pulling
it
straight
out
of
the
SSA.
7.
If
you
are
not
immediately
installing
another
power
supply,
fasten
a
coverplate
over
the
empty
power
supply
bay.
Caution:
If you plan to operate the chassis with only one power supply, be sure to install the
coverplate in place of the removed power supply to contain EMI radiation and ensure proper air
circulation.
Precaución:
Si desea trabajar sólo con una fuente de poder, no olvide colocar la tapa en el
compartimiento de la fuente de poder que haya eliminado, para reducir la interferencia
electromagnética y para asegurar una buena ventilación.
Summary of Contents for SSA-G1018-0652
