Verifying the Operation of the Access Point
3-24 Installing the Access Point
Table 3-2: Access Point LED Patterns
= On
= Off
= Constant blinking
= Random blinking
Wired
LAN
Wireless
LAN
Access
Point
Saturated
Bridge
State
Power/
System
OK
Meaning of LED
Pattern
No power. Check the power
connections.
Diagnostics failed. The AP
automatically resets after one
minute. If the pattern
continues to display, contact
technical support.
Normal operating mode.
AP is waiting for the
spanning tree. No action is
required. Or, Spanning Tree
detected a bridge loop and
disconnected the port.
Remove the loop.
AP is occasionally saturated.
No action is required.
Cannot communicate with
the wireless network. Verify
that the PC Card is properly
inserted.
Cannot communicate with
the wired network. Verify
that the Ethernet cable is
properly connected.
Cannot communicate with
the wireless or wired
network.
2
1
