Installing and Connecting a Redundant Power System
2-16
Installation
.
Figure 2-9
Power Connectors on STK-RPS-150PS
(rear view)
Figure 2-10
STK-RPS-150PS RPS Cable and AC Power Cord Connections
4.
If the switch itself is not plugged into power, the front panel RPS LED indicator will show that
a redundant power supply is now in operation.
.
This completes the installation.
Note:
No change in switch configuration is necessary for this installation.
1
Redundant power supply connector
2
AC power connector
1
A4 switch
4
A4 switch redundant power supply connector
2
RPS cable (1 meter long)
5
AC power cord (type varies depending on country)
3
STK-RPS-150PS redundant power supply
connector
6
AC power outlet with ground connection
(type varies depending on country)
Note:
No change in switch device configuration is necessary for this installation.
Summary of Contents for A4H124-24
