ChemloCk PFA And PP Filter housings instAllAtion And use mAnuAl
entegris, inC.
ChemloCk PFA And PP Filter housings mAnuAl
7
Install the Filter
Install a filter in the housing bowl and tighten
the bowl to the housing head:
1. Cut open the bottom of the bag only.
2. To ensure cleanliness, hold the cartridge by
the bag, and insert it into the housing bowl.
3. Using the end of the bag, the two finger tabs on
the key can be used to turn the cartridge
1
/
4
turn;
then lock the cartridge in place.
NotE: Lock the cartridge in place by turning
it clockwise.
4. Attach and tighten the bowl to the housing head.
The housing can be mounted in either a bowl
Up
or bowl
Down
position.
5. Adjust the torque setting to 45 N•m if using an
E-FKM o-ring. For other o-ring types, 28.5 N•m.
Once set, twist the lever at the end of the wrench
clockwise to
LOCK
the setting in place.
