Using the Reset Switch:
START HERE
➔
Use the Reset
switch only if you
cannot turn off the
tablet by any other
means because you
may lose unsaved
data.
1.
If the tablet does not appear
to be accepting input and you
cannot turn it off by using
methods described above,
press the Reset switch.
-
the Reset switch is located
just below the power on/off
button on the side of the
tablet. #14
Using Your Finger and Stylus:
START HERE
➔
Your tablet uses
both touch and
stylus control.
Finger-touch is
quick and
convenient, while
stylus control
provides pinpoint
accuracy when
needed.
With the tablet display facing you,
the stylus is stored at the lower-
right side of the tablet.
Using your finger, locate the catch
on the stylus and pull it out
slightly. Then pull the stylus out
fully with your finger and thumb.
Note that the stylus has left and
right mouse button controls on the
barrel. Feel free to use these
controls if you are more
comfortable with traditional
mouse actions rather than tap-and-
hold gestures. More information
below.
Page 14 | Crossfire Pro User Manual | entegratec.com |