background image

7

Grounding instructions

Applicable to machines with  a three pin plug. 

This appliance

must be grounded. If it should malfunction or breakdown,

grounding provides a path of least resistance for electric current

to reduce the risk of electric shock. This appliance is equipped

with a cord having an equipment-grounding conductor and

grounding plug. The plug must be plugged into an appropriate

outlet that is properly installed and grounded in accordance with

all local codes and ordinances.

DANGER!

I

mproper connection of an equipment-grounding conductor can

result in risk of electric shock. Check with qualified electrician or

service person if you are in doubt as to whether the outlet is

properly grounded, Do not modify the plug provided with the

appliance. If it will not fit the outlet, have proper outlet installed

by a qualified technician.

T

his appliance is for use on a nominal 120 volt circuit and has a

grounding plug that looks like the plug illustrated in Figure A.

A temporary adaptor which looks like the adaptor illustrated in

Figure B may be used to connect this plug to a two-pole

receptacle, as shown, if a properly grounded outlet is not

available. The temporary adaptor should be used only until a

properly grounded outlet, Figure A, can be installed by a

qualified electrician. The green colored rigid ear, lug, or the like

extending from the adaptor must be connected to a permanent

ground such as a properly grounded outlet box cover. Whenever

the adaptor is used, it must be held in place by a metal screw.

NOTE! This temporary adaptor is not permitted in Canada.

Servicing of double-insulated

appliances

Applicable to machines with a two-pin plug

In a double-insulated appliance, two systems of insulation are

provided instead of grounding. No grounding means is provided

on a double-insulated appliance, nor should a meand for

grounding be added to the appliance. Servicing a double-

insulated appliance requires extreme care and knowledge of the

system, and should be done only by qualified service personnel.

Replacement parts for a double-insulated appliance must be

identical to the parts they replace. A double insulated appliance

is marked with the words

"DOUBLE INSULATION" or "DOUBLE INSULATED."

The symbol (square within a square)

may also be used on the product.

SERVICE INFORMATION

To obtain consistent performance over the life of your vacuum,

read through these instructions and keep them handy for future

reference. If you require service, contact the dealer from whom

the vacuum was purchased, or the local authorized Service

Station. Always refer to your Service Station for complete

service information, For prompt and complete service informa-

tion, always refer to the model, type and serial number indicated

on the rating plate.

Grounding / Double insulation instructions

FIGURE B

FIGURE A

Grounded outlet box

Grounding blade is the longest of the 3

blades

Grounded

outlet box

Metal

screw

Adaptor

Groundning tab

Summary of Contents for GD 930









Reviews: