13
RAK111_ENG / © Ensto 2019
5.4. Ground Mounting on Concrete Foundation with Ground Mounting Pole
Items needed:
Ground mounting pole EVTL43.00
1 pcs
Adapter for ground mounting EVTL44.00
1 pcs
Concrete foundation (from different manufacturers)
1 pcs
Bolts (not included)
Washers (not included)
Nuts (not included)
Installation steps
1. Dig holes for cable conduits and the concrete
foundation to necessary depths.
2. Add gravel to the bottom of the trench, to such
thickness that the top of the foundation will
reach desired level when lifted into the hole.
Note! Consider the possible paving materials
when setting the level.
3. Lift the concrete foundation into the installa-
tion hole. For more information, please see the
concrete foundation mounting instructions.
4. Put cable and possible drain conduits in place.
5. Lift the adapter EVTL44.00 into the concrete
foundation. Cut the adapter, if necessary. Ad-
just the adapter in such a manner, that the
adapter is perpendicular. Make sure, that the
adapter is securely in place and does not swing.
6. Pull electric cables through the conduits and
the adapter approx. 1500 mm measured from
the adapter flange.
7.
Tighten the foundation to its place by filling
the excess space outside the foundation with
gravel.
8. Fix the ground mounting pole on the adapter
with bolts, washers and nuts.
9. Pull the electrical cables through the ground
mounting pole.
10. Attach the Wallbox on the mounting pole. See
instructions on page 16.
x 4
x 8
x 4
