- 12 -
PU tires replacement instruction:
※
Replacable tire and motor
Loosen 6 screws with hexwrench then pull out the PU tire, insert the new one
into the motor hub, and tighten the screws to complete the replacement.
Motor replacement instruction:
1
.
Turn off the skateboard, unplug the waterproof cable, remove the screws,
replace by new motor and secure the screws.
2
.
Follow the alignment mark on the waterproof plug and insert the connector
to assuring correct mating. Caution: When the connection failed or can't be
fastened, make sure to realign. Forcibly connection may damage the plug.
(View figure 10)
VIII. Other safety warnings
SAFETY WARNINGS
A. General Disclaimer
1. Riding skateboard can be a dangerous activity, certain conditions may cause
the equipment failure. Like other electric transportation products, falling, losing
control, collisions, including failure to obey the user manual, may cause injury
even death. In order to minimize the risk, ensure you read the user manual
carefully.
2. RIDE AT YOUR OWN RISK AND USE COMMON SENSE.
3. This manual contains many warnings and cautions concerning the
consequences of failing to maintain, inspect or properly use your skateboard.
We repeat: any accident may result in possible serious injury or death.
4. WEAR HELMET AND PROTECTIVE GEAR AT ALL TIMES.
Driving wheels
High temperature warning: Risks of burns.
Right after long-term use, do not touch the rear axle or driving motor. The
driving motor produces heat and may cause serious burns. Cool down
these areas before touching.
(Figure 10)
