TM
BrightEye 90-A
BrightEye 90-A - Page 3
The HDMI output provides confidence monitoring of the same signal that is on
the two SDI output BNCs. When SD SDI is present on the SDI outputs,
composite video will be present on the composite output BNC.
BrightEye 90-A is powered by a 12 volt DC universal power supply. This power
supply can accept an input voltage between 100 and 230 volts, at 50 or 60 Hertz.
It uses a standard IEC line cord and can be used anywhere in the world. It is
normal for the converter to be quite warm to the touch when operating.
For your reference, see the functional block diagram of the BrightEye 90-A on this
page and the next page. The diagram appears twice, first in a portrait view, then
larger as a landscape view.
Composite or Tri-Level
Ref In
Genlock
HD/SD SDI/Composite
Video In
Balanced
Analog Audio
Inputs
Analog
Decoder
Auto-Selecting
SDI
Receiver
Audio
Demux
24 bit
Audio
ADC
24 bit
Audio
DAC
Ch 1/2
Composite
Out
Ch 3/4
Ch 5/6
Ch 7/8
Ch 1/2
Ch 3/4
Ch 5/6
Ch 7/8
Audio
Processing
SDI Driver
Composite
Encoder
(SD Only)
HD/SD SDI Out
HDMI Out
Headphone
Jack
Balanced
Audio Outputs
HDMI
Xmtr
Monitor
Amp
Audio I/O selectable as:
Mux 8 = 8 inputs or
Mux 4 = 4 in/4 out or
Demux = 8 outputs
Provides embedded pass through of all 16 audio channels
Up/Down/Cross
Conversion
Audio Mux
BrightEye 90-A Functional Block Diagram, portrait view
