![Ensemble Designs BrightEye 90-A User Manual Download Page 12](http://html1.mh-extra.com/html/ensemble-designs/brighteye-90-a/brighteye-90-a_user-manual_2414176012.webp)
BrightEye 90-A HD Up/Down/Cross Converter and ARC with Analog Audio
BrightEye 90-A - Page 12
Status Indicators
The following status indicators are provided on the front panel:
Embed In
Illuminates green when an embedded audio stream is detected on the
HD/SD SDI/Cpst In
video input BNC. This applies only to SDI signals.
Audio Mode
Indicates the currently selected audio I/O mode. Choices are
Mux 4
(4 inputs
and 4 outputs),
Mux 8
(8 inputs), or
Demux
(8 outputs).
Gain (Audio)
These controls allow for quick adjustment of Gain level for the channel pairs.
Gain adjustment is done in conjunction with the VU indicators. For
independent channel adjustment, and other controls, use BrightEye PC or
Mac. The indicator illuminates green when the gain for a given audio channel
pair is set to nominal or unity setting, or red when set to other than unity.
VU
VU output level and the status of the Gain adjustment for each of these
channel pairs is indicated by the state the VU and Gain indicators for each
of the channel pairs. The VU indicator illuminates red when the audio level
exceeds the headroom level set by the user (using the Peak Indicator control
in BrightEye PC or Mac). The indicator illuminates green when the gain
for a given audio channel pair is set to unity, red when set to other
than unity, or yellow when gain exceeds 0 VU (-20dBFS).
Mon Vol (Monitor Volume)
Illuminates green when monitor volume is set to unity, or red when set to
other than unity.
Input
Indicates the type of video signal detected on the
HD/SD SDI/Cpst In
video
input BNC. Choices are
HD
or
SD/Composite
.
Ref
(Reference) illuminates
when a valid reference is detected on the
Ref In
BNC.
Output
Indicates the type of video signal selected on the
HD/SD SDI Out
BNC.
Choices are
1080i
,
720p
,
1080p
,
1080sF
or
SD
.
Mode
Indicates the output aspect ratio when upconverting the input signal.
Choices are:
• Anamorphic
– original material is stretched as needed to 16:9.
•
Box
– Letter Box or Pillar Box is applied to the original material.
•
Crop
– top and bottom edges, or right and left edges are cropped off the
original material.
•
Manual
– Illuminates green when the output aspect ratio has been set
manually.