Avenue System Overview
Avenue Intersection–10
Ver
Adr
V ip
ip1
ip2
ip3
ip4
Tch
1.5.0
1 - 1023
1 - 1023
192.168.0.10
Press Ent to Reset
Touch Panel
XXX.
168.0.10
192
.XXX
.0.10
192.168.
XXX
.10
192.168.0.
XXX
Use S1 to enter the menu. The current version of system
software on the Control Module will scroll through the display.
Use S1 to enter the menu. The current AveNet address of this
Control Module will be displayed. To change address, use S3 to
move to the desired number. Press S4 to set the parameter and exit.
Use S1 to enter the menu. The current IP address of this
Control Module will be displayed. To change address,
To change address, use ip1-4 below.
Use S1 to enter the menu. Set the first segment of the IP address
by using S3 to scroll through the numbers 0-255. Press S4 to set
the parameter and exit the menu.
Use S1 to enter the menu. Set the second segment of the IP address
by using S3 to scroll through the numbers 0-255. Press S4 to set
the parameter and exit the menu.
Use S1 to enter the menu. Set the third segment of the IP address
by using S3 to scroll through the numbers 0-255. Press S4 to set
the parameter and exit the menu.
Use S1 to enter the menu. Set the fourth segment of the IP address
by using S3 to scroll through the numbers 0-255. Press S4 to set
the parameter and exit the menu.
Press the ENTER button, S4, to reset the calibration on
the Touch Screen Panel.
Avip
On/Off
Use S1 to enter the menu. Use S3 to turn AveNet Over IP on or off.
Press S4 to set the parameter and exit the menu.
Lo A
Use S1 to enter the menu. Use S3 to scroll to the
upper (highest) AveNet address in the frame group. Use S4 to set the
parameter and exit the menu.
Use S1 to enter the menu. Use S3 to scroll to the
lowest AveNet address in the frame group. Use S4 to set the
parameter and exit the menu.
1 - 1023
Up A
S3
S1
Enter/Exit
System Control Module Status Menu
