Network Camera User Manual
124
Note:
Some certain cameras support Wireless Alarm, PIR (passive infrared sensor)
Alarm or Emergency Alarm.
Wireless Alarm
Purpose:
When wireless alarm signal is sent to the camera from the detector, such as the
wireless door contact, the wireless alarm is triggered and a series of response actions
can be taken.
Steps:
1.
Enter the Wireless Alarm Settings interface:
Configuration > Advanced Configuration> Basic Event > Wireless Alarm
Setting Wireless Alarm
2.
Select the wireless alarm number.
Up to 8 channels of external wireless alarm input are supported.
3.
Check the checkbox of
Enable Wireless Alarm
to activate the wireless alarm.
4.
Input the alarm name in the text field as desired.
5.
Check the checkbox to select the linkage methods taken for the wireless alarm.
6.
Click
Save
to save the settings.
7.
Locate the external wireless device beside the camera, and go to
Configuration >
System > System Settings > Remote Control
to arm the camera and study the
Summary of Contents for SIP46B5/28-H
