ENQUATICS AquaMaster Masters Decorative Series, Owner'S Manual

Page: 8 / 37

NIGHT GLOW LIGHTING SYSTEMS
ASSEMBLY INSTRUCTIONS
1. Place light bracket in mating cavity on the underside of the float as shown in
Figure 1.
2. Insert 3/8” SS bolt through washer, through the float into light bracket as
shown.
3. Secure the light bracket from the bottom with a 3/8” locking nut and washer.
4. Tighten the nut using (2) 9/16” wrenches or pliers. DO NOT over tighten.
5. Make sure the light retaining clips are in the “open” position. The clips are
positioned without the use of tools.
6. Insert the light housing from the top down as shown in Figure 2.
Figure 2
Light Housing
Light Retaining
Clips
Page 5
Figure 1
3/8-16 SS Bolt
3/8 SS Extra
Thick Washer
Light Bracket
3/8 SS Extra
Thick Washer
3/8-16 SS
Nylock Nut